Spray Foam Roofing services in Riverside, CA

Trusted Spray Foam Roofing Services in Riverside, CA

Riverside's trusted spray foam contractor for commercial roofing, residential insulation, and emergency roof repair across California.

Licensed & Insured 4.8-Star Rated 24/7 Emergency Service Serving Riverside
17,895+ Projects Completed
13,409+ Happy Customers
151+ 5-Star Reviews
22+ Years Experience

Spray Foam Services in Riverside

Professional roofing, coating, and insulation services for Riverside property owners and facility managers.

Roof Waterproofing

Waterproof your flat or low-slope roof with a spray-applied membrane system that eliminates the seam failures, flashing leaks, and ponding damage that plague conventional roofing. One seamless application. Permanent results.

Spray Foam Roofing Repair

Expert repair for existing SPF roofs including blistering, coating deterioration, punctures, and storm damage. We restore your foam roof to like-new condition with matching materials and factory-specified application techniques.

Flat Roof Repair

Stop chasing flat roof leaks with temporary fixes. Our diagnostic approach pinpoints the exact failure point, and our repair methods address the root cause — whether it is failed flashing, membrane damage, or ponding water that needs re-sloping.

Roof Leak Repair

Active roof leak? We locate the source using advanced detection methods, then repair it permanently at the root cause. No guesswork, no temporary patches — just lasting results backed by our workmanship warranty.

Silicone Roof Coating

Silicone coatings provide the longest service life of any roof coating product. Our crews apply them over metal, TPO, EPDM, built-up, and spray foam surfaces — sealing the entire roof in a seamless, reflective, waterproof membrane.

Roof Inspection

Pre-purchase, post-storm, or routine maintenance — our inspection reports give you the data you need to make informed decisions about your roof. Infrared moisture scans reveal trapped water invisible from the surface.

Metal Roof Coating

Metal roofs leak at fasteners, seams, and panel overlaps. Our coating systems bridge and seal every one of these failure points while adding a reflective finish that reduces surface temperatures and cooling costs significantly.

Roof Restoration

When your roof is structurally sound but the surface is deteriorating, restoration is the smart investment. We clean, repair, and recoat your entire roof with a warranted system that performs like new at a fraction of replacement cost.

Crawl Space Insulation

Cold floors, musty smells, and high energy bills often trace back to an uninsulated or poorly insulated crawl space. Our closed-cell spray foam seals the entire crawl space envelope — walls, rim joists, and sill plates — creating a conditioned space.

Spray Foam Roofing

Complete SPF roof systems for commercial and residential buildings. Our factory-trained crews apply closed-cell foam directly to your roof deck, creating a monolithic waterproof membrane that eliminates seams, joints, and the leak points they create.

Attic Insulation

Upgrade your attic insulation from fiberglass or cellulose to spray foam and feel the difference the same day. SPF does not settle, sag, or leave gaps — it expands to fill every cavity and seals air leaks that other materials miss.

Commercial Roof Restoration

Commercial roofs deteriorate from the surface down. If your structure and deck are sound, restoration with spray foam and silicone coating is the economically superior choice. We handle buildings from 5,000 to 500,000 square feet.

Roof Maintenance

Our maintenance programs extend roof life and reduce total cost of ownership. Semi-annual or annual visits include drain clearing, seam inspection, penetration checks, coating condition assessment, and immediate repair of minor issues.

Roof Replacement

Our replacement process is thorough: remove existing roofing to the deck, inspect and repair substrate, apply closed-cell SPF to specified thickness, and finish with a UV-protective coating. The result is a monolithic roof system with no seams to fail.

Storm Damage Roof Repair

Hail, wind, and debris damage demand immediate attention and thorough documentation. Our crews respond quickly, document all damage with photos and measurements that satisfy insurance adjusters, and restore your roof completely.

About Lapolla Industries in Riverside, CA

The Riverside metro area contains some of the highest energy costs per square foot in California. Lapolla Industries addresses this with spray polyurethane foam — the most thermally efficient roofing and insulation system available. Our SPF installations across the Riverside area consistently deliver 25 to 40 percent reductions in HVAC energy consumption for commercial and residential properties alike.

What makes spray foam different from every other insulation material is its dual role as both insulator and air barrier. In Riverside buildings where air leakage through conventional assemblies can account for 40 percent of total energy loss, a spray foam system pays for itself through savings alone — often within 3 to 5 years. Lapolla Industries has the California track record to prove it.

Spray polyurethane foam applied to the underside of a metal roof deck in Riverside

Why Riverside Property Owners Choose Us

We are committed to delivering exceptional spray foam solutions that protect your biggest investment.

Transparent Pricing

No hidden fees, no surprise charges. You receive a detailed written estimate before we start and the final invoice matches — guaranteed. Every line item explained.

Seamless Application

Unlike conventional roofing with seams, joints, and fasteners, spray foam creates a monolithic membrane with zero penetration points — eliminating the most common sources of roof leaks.

Energy Savings Guarantee

SPF roofing delivers the highest R-value per inch of any commercial insulation. Our customers typically see 20 to 40 percent reductions in heating and cooling costs after installation.

24/7 Emergency Response

Storms do not wait and neither do we. Our emergency crews are on call around the clock to tarp, secure, and protect your property when you need it most.

Manufacturer Warranties

Every project comes backed by manufacturer material warranties plus our own workmanship guarantee. We handle all warranty registration so you are always covered.

Frequently Asked Questions

Have questions about spray foam in Riverside? We have answers.

How much does spray foam insulation cost in Riverside?

Spray foam insulation costs in Riverside typically range from $1.50 to $3.50 per square foot for open-cell and $3.00 to $7.00 per square foot for closed-cell. The exact price depends on the area being insulated, foam thickness, and accessibility. Most Riverside homeowners see a full return on investment through energy savings within 3 to 5 years.

What type of roof coating lasts the longest in Riverside?

Silicone roof coatings offer the longest service life for flat and low-slope roofs in Riverside. Unlike acrylic coatings, silicone does not re-emulsify in ponding water and maintains its flexibility and UV resistance for 15 to 20 years. We recommend silicone for any Riverside roof with drainage challenges or heavy weather exposure.

How long does a spray foam roof last in Riverside?

A properly installed SPF roof in Riverside can last 30 to 50 years with periodic recoating every 10 to 15 years. The closed-cell foam itself does not degrade — only the protective topcoat needs maintenance. Many spray foam roofs installed in the 1970s are still performing today.

Do you offer free roof inspections in Riverside, CA?

Yes. Every project in Riverside begins with a no-obligation roof inspection. Our crews assess the condition of your existing roof, identify problem areas using infrared moisture scanning when needed, and provide a detailed estimate with photos and recommendations. There is never a charge for the initial inspection.

Is spray foam roofing energy efficient in Riverside, CA?

Yes. Spray foam roofing provides the highest R-value per inch of any commercial roofing insulation — typically R-6.5 per inch. In Riverside, this translates to significant cooling and heating savings because the seamless membrane eliminates air infiltration that accounts for up to 40 percent of energy loss in conventional roofs.

How long does attic insulation installation take in Riverside?

Most residential attic insulation projects in Riverside are completed in a single day. Our crews prep the space, apply the spray foam to the desired thickness, and clean up within 6 to 8 hours. The foam cures within minutes, and you can feel the difference in your home comfort levels the same day.

What Our Customers Say

Real reviews from property owners we have served across the country.

★★★★★

"After a major hailstorm damaged our commercial roof, they walked the entire surface with us documenting every impact point. Their insurance report was so thorough the adjuster approved the full claim on the first visit. Seamless process from start to finish."

— Donna Matsuda
★★★★★

"We manage a 40,000 square foot retail center and the roof was near end of life. Instead of tearing it off they restored it with a spray foam and coating system. Saved us over sixty percent versus replacement and added twenty years of life."

— Mark Townsend
★★★★☆

"Lapolla Industries repaired our flat roof after a section of the membrane started bubbling and lifting. They removed the damaged area, applied new substrate, and sealed everything tight. Solid repair at a fair price."

— William Becker

Nearby Cities We Serve

We also provide spray foam roofing and insulation services in these neighboring communities.

Find Us in Riverside

Get a Free Estimate in Riverside, CA

Call today for a no-obligation spray foam roofing or insulation estimate anywhere in California.

(866) 605-0362 — Free Estimate